eg-blog

Feed Rss
Archive for März, 2013

Subsonic 4.7-031, Madsonic and DSM 4.2

03.24.2013, 22 Comments, Allgemein, Download / Release Notes, Subsonic on Synology DS, by .

As many of you are struggling with my „new scripted“ versions 029 and 030 I rolled back to the 028, which means:

  • no downloading during install is required
  • because of that the .spk file contains everything that is needed to run Subsonic on all three plattforms (x86, ARM and PPC)

Another point is the separation of Subsonic and Madsonic (aka MashupMod) which means that from now on there are two independent packages. You can only install one at a time. I had to do this because a package that contains both would just be to large. Also I can now update the Madsonic package without touching the original one.

Also I have removed the Subtunes interface because I didn’t like it and it doesn’t seem to be continued anymore.

In DSM 4.2 „Perl“ becomes an official Synology package. It was installed by default before, so I didn’t care about whether it’s installed or not. It is required during the installation process. Please make sure it is installed before you start the Subsonic installation.

 

By now both packages are available in my Dropbox beta Folder only:

https://www.dropbox.com/sh/y9lcl2xsznvve80/31mcnc5gpE

Madsonic4.7-B3158SE-001.spk

Subsonic4.7-031.spk

Please let me know whats wrong with these ones, especially during install and startup (I haven’t worked on the transcoding problems)

 

I haven’t encountered any problems using DSM 4.2. In fact I like the new package center design. I’ve added a few screen shots to the information section of Subsonic and ownCloud.

ownCloud 5.0.0 Synology package

03.24.2013, 21 Comments, Allgemein, Download / Release Notes, ownCloud on Synology DS, by .

Finally 😉

ownCloud 5 is out and updating should be no big deal. Simply hit the update button, follow the usual instructions and install ownCloud.

After the installation is finished browse to your ownCloud page (click the DSM link) and wait for the update to complete (this takes another few seconds…)

5.0.0_updateYou will be redirected to the login page afterwards.

It is already online in my Dropbox Folder

https://www.dropbox.com/sh/4i5mjlhlnoe1qg4/B-SLEOoZH2

The repo will be online soon.

___________________________________

Now: Fixing Subsonic package again =(…

ownCloud 4.5.7 package

03.03.2013, 13 Comments, Allgemein, Download / Release Notes, ownCloud on Synology DS, by .

Nothing special here just the an usual ownCloud update…

Subsonic 4.7-030 package

03.03.2013, 55 Comments, Allgemein, Download / Release Notes, Subsonic on Synology DS, by .

Edit: As you can see in the comments many of you are still having problems on this use the 029 version from my dropbox folder!
https://www.dropbox.com/sh/vd06e2fn2157gh0/kE6FO5J1cD

 

Hey I am back online and made a new package.

I’m sorry that it won’t please all of you (e.g. the flac transcoding still doesn’t work).

But there are a few fixes in it. All download problems should have been fixed. The Process ID check needed for start and stop procedure has been updated again. All additional packages are now up to date…

The Hibernation should work now (at least with the MashupMod version). I have done a lot of testing with this one, it doesn’t work right from the start but after a few hours when everything is scanned and sorted out the HDDs should stop, and the DiskStation goes into hibernation mode. After that the hibernation behaves like configured in DSM. The DS seems to wake up from time to time for no reason, but I encountered that before even with Subsonic stopped or uninstalled.

Because I just own an ARM DiskStation I can’t do any bug fixing on other DiskStations so please let me know if everything woks as described above or not.

Now have fun with it 😉

PS: I have to work away for the next Weeks so I’m not able to fix anything until I’m home again, but I will try to help you as much as I can 😉

Scripts:

installer.sh

#!/bin/sh

#--------Subsonic installer script
#--------package maintained at eg-blog.de

DOWNLOAD_URL_STANDARD="http://sourceforge.net/projects/subsonic/files/subsonic/4.7/subsonic-4.7-standalone.tar.gz/download"
DOWNLOAD_URL_MASHUPMOD="https://www.dropbox.com/s/71lxyirndqv0dgr/MashupMod-4.7_B3158SE.zip"
DOWNLOAD_URL_SUBTUNES="http://subtunes.googlecode.com/files/subtunes-0.9.4b.zip"
DOWNLOAD_URL_MINISUB="https://github.com/tsquillario/MiniSub/tarball/master"
SYNO_CPU_ARCH="`uname -m`"
NATIVE_BINS_URL="http://eg-blog.de/download/serviio-native-${SYNO_CPU_ARCH}.tgz"
NATIVE_BINS_FILE="`echo ${NATIVE_BINS_URL} | sed -r "s%^.*/(.*)%\1%"`"

SHA256_MINISUB="ce4acaa38dc9f3f893f04e49db9f98cd1e4d01a9451539a283156cd0c1158079"
SHA256_SUBTUNES="9b9be0d3be3dcb0154032d282e144f1a1ba59530aa437e0e5dd4eb01bc6b2c5d"
SHA256_MASHUPMOD="47a274b30d1387a069c13b72789bbfdca57e182d6efc7e5c64f14d216518746b"
SHA256_STANDARD="cb798a007a862b2e66ab1d7d345753b157ae287e5dccb094976d02305926bad0"
SHA256_armv5tel="9eeb23f4c5746ba495a014b6e30326c7762de0fd06f728e1092b40d59b7d019b"
SHA256_ppc="26ee8e796d752ee6c26fdd64726fb7aa4240d381efe2a26a464ca21a4949e11b"
SHA256_x86_64="62301d3461166b52724b55d32fb493f9b564aded9eba4fdff9b98bb3c83fdca1"

source /etc/profile
TEMP_FOLDER="`find / -maxdepth 2 -name '@tmp' | head -n 1`"
PUBLIC_FOLDER="`cat /usr/syno/etc/smb.conf | sed -r '/\/public$/!d;s/^.*path=(\/volume[0-9]{1,4}\/public).*$/\1/'`"

PID=""
subsonic_get_pid ()
{
	PID=`ps | grep java | grep subsonic | awk '{print $1}'`
	echo "$(date +%d.%m.%y_%H:%M:%S): looking for PID" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
}

preinst ()
{
	source /etc/profile

	########################################
	#check if Java is installed

	if [ -z ${JAVA_HOME} ]; then
		echo "Java is not installed or not properly configured. JAVA_HOME is not defined. " > $SYNOPKG_TEMP_LOGFILE
			echo "Download and install the Java Synology package from http://wp.me/pVshC-z5" >> $SYNOPKG_TEMP_LOGFILE
			echo "$(date +%d.%m.%y_%H:%M:%S): Download and install the Java Synology package from http://wp.me/pVshC-z5" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		exit 1
	fi

	if [ ! -f ${JAVA_HOME}/bin/java ]; then
		echo "Java is not installed or not properly configured. The Java binary could not be located. " > $SYNOPKG_TEMP_LOGFILE
			echo "Download and install the Java Synology package from http://wp.me/pVshC-z5" >> $SYNOPKG_TEMP_LOGFILE
			echo "$(date +%d.%m.%y_%H:%M:%S): Download and install the Java Synology package from http://wp.me/pVshC-z5" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		exit 1
	else
		echo "$(date +%d.%m.%y_%H:%M:%S): found Java in ${JAVA_HOME}" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi

	#########################################
	#check if Subsonic folder is in public folder wehn restore is selected
	if [ ! -z ${install_restore} ]; then

		if [ ! -d $PUBLIC_FOLDER/Subsonic ]; then
			echo "Can't find a folder named 'Subsonic' in your public folder. " > $SYNOPKG_TEMP_LOGFILE
			echo "$(date +%d.%m.%y_%H:%M:%S): Can't find a folder named 'Subsonic' in your public folder. " >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "Please check your public folder and make sure there is a folder called Subsonic (with Capital S) in it. Or select 'No' if you don't want to restore anything and just install Subsonic normally" >> $SYNOPKG_TEMP_LOGFILE
			echo "$(date +%d.%m.%y_%H:%M:%S): Please check your public folder and make sure there is a folder called Subsonic (with Capital S) in it. Or select 'No' if you don't want to restore anything and just install Subsonic normally" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			exit 1
		fi
	fi

	#########################################
	#is the User Home service enabled?
	UH_SERVICE=maybe
	synouser --add userhometest Testing123 "User Home test user" 0 "" ""
	UHT_HOMEDIR=`cat /etc/passwd | sed -r '/User Home test user/!d;s/^.*:User Home test user:(.*):.*$/\1/'`
	if echo $UHT_HOMEDIR | grep '/var/services/homes/' > /dev/null; then
		if [ ! -d $UHT_HOMEDIR ]; then
			UH_SERVICE=false
		fi
	fi
	synouser --del userhometest
	if [ ${UH_SERVICE} == "false" ]; then
		echo "The User Home service is not enabled. Please enable this feature in the User control panel in DSM." >> $SYNOPKG_TEMP_LOGFILE
		echo "The User Home service is not enabled. Please enable this feature in the User control panel in DSM." >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		exit 1
	else
		echo "$(date +%d.%m.%y_%H:%M:%S): User home is enabled" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi

	exit 0
}

postinst ()
{
	#create subsonic daemon user
	synouser --add subsonic `${SYNOPKG_PKGDEST}/passgen 1 20` "Subsonic daemon user" 0 "" ""
	echo "$(date +%d.%m.%y_%H:%M:%S): create subsonic daemon user" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

	#determine the subsonic user homedir and save that variable in the user's profile
	#this is needed because librtmp needs to write a file called ~/.swfinfo
	#and new users seem to inherit a HOME value of /root which they have no permissions for
	SUBSONIC_HOMEDIR=`cat /etc/passwd | sed -r '/Subsonic daemon user/!d;s/^.*:Subsonic daemon user:(.*):.*$/\1/'`
	su - subsonic -s /bin/sh -c "echo export HOME=${SUBSONIC_HOMEDIR} >> .profile"

	#########################################
	##download stuff
	#select the right mods / version to download/install
	if [ ! -z ${mashupmod_install} ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): download and install MashupMod" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		#download Mashupmod
		wget ${DOWNLOAD_URL_MASHUPMOD} --no-check-certificate --output-document=${SYNOPKG_PKGDEST}/MashupMod.zip
		if [ -f ${SYNOPKG_PKGDEST}/MashupMod.zip ]; then
			echo "$(date +%d.%m.%y_%H:%M:%S): downloaded MashupMod from $DOWNLOAD_URL_MASHUPMOD" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			#CheckSum
			if [ `/opt/bin/sha256sum ${SYNOPKG_PKGDEST}/MashupMod.zip  | awk '{ print $1 }` = $SHA256_MASHUPMOD ]; then
				echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum OK" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			else
				echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum failed for MashupMod.zip" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
				echo "SHA256 checksum failed for MashupMod.zip. The file was probaply modified or updated" >> $SYNOPKG_TEMP_LOGFILE
				exit 1
			fi
		else
			if [ -d ${PUBLIC_FOLDER} ] && [ -f ${PUBLIC_FOLDER}/Mashupmod.zip ]; then
				cp ${PUBLIC_FOLDER}/Mashupmod.zip ${SYNOPKG_PKGDEST}
				echo "$(date +%d.%m.%y_%H:%M:%S): copied Mashupmod install files from public folder" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			else
				echo "There was a problem downloading  Mashupmod from the official download link, " >> $SYNOPKG_TEMP_LOGFILE
				echo "which was ${DOWNLOAD_URL_MASHUPMOD}" >> $SYNOPKG_TEMP_LOGFILE
				echo "Alternatively, you may download this file manually and place it in the 'public' shared folder. and name it Mashupmod.zip" >> $SYNOPKG_TEMP_LOGFILE
				exit 1
			fi
		fi
		unzip ${SYNOPKG_PKGDEST}/MashupMod.zip -d ${SYNOPKG_PKGDEST}
		echo "$(date +%d.%m.%y_%H:%M:%S): extracted MashupMod" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		rm ${SYNOPKG_PKGDEST}/MashupMod.zip
		echo "$(date +%d.%m.%y_%H:%M:%S): deleted downloaded files" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	else
		#download Subsonic
		echo "$(date +%d.%m.%y_%H:%M:%S): download and install Subsonic standard" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		wget ${DOWNLOAD_URL_STANDARD} --output-document=${SYNOPKG_PKGDEST}/Subsonic.tgz
		if [ -f ${SYNOPKG_PKGDEST}/Subsonic.tgz ]; then
			echo "$(date +%d.%m.%y_%H:%M:%S): downloaded Subsonic install file from $DOWNLOAD_URL_STANDARD" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			#Checksum
			if [ `/opt/bin/sha256sum ${SYNOPKG_PKGDEST}/Subsonic.tgz  | awk '{ print $1 }` = $SHA256_STANDARD ]; then
				echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum OK" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			else
				echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum failed for Subsonic.tgz" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
				echo "SHA256 checksum failed for Subsonic.tgz. The file was probaply modified or updated" >> $SYNOPKG_TEMP_LOGFILE
				exit 1
			fi
		else
			if [ -d ${PUBLIC_FOLDER} ] && [ -f ${PUBLIC_FOLDER}/Subsonic.tar.gz ]; then
				cp ${PUBLIC_FOLDER}/Subsonic.tgz ${SYNOPKG_PKGDEST}
				echo "$(date +%d.%m.%y_%H:%M:%S): copied Subsonic install files from public folder" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			else
				echo "There was a problem downloading  Subsonic from the official download link, " >> $SYNOPKG_TEMP_LOGFILE
				echo "which was ${DOWNLOAD_URL_STANDARD}" >> $SYNOPKG_TEMP_LOGFILE
				echo "Alternatively, you may download this file manually and place it in the 'public' shared folder. and name it Subsonic.tgz" >> $SYNOPKG_TEMP_LOGFILE
				exit 1
			fi

		fi
		tar xzf ${SYNOPKG_PKGDEST}/Subsonic.tgz -C ${SYNOPKG_PKGDEST}
		echo "$(date +%d.%m.%y_%H:%M:%S): extracted Subsonic" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		rm ${SYNOPKG_PKGDEST}/Subsonic.tgz
		echo "$(date +%d.%m.%y_%H:%M:%S): deleted downloaded files" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

	fi
	#delete the original subsonic.sh and use the edited file for Synology
	if [ -f ${SYNOPKG_PKGDEST}/subsonic.sh ]; then
		rm ${SYNOPKG_PKGDEST}/subsonic.sh
		echo "$(date +%d.%m.%y_%H:%M:%S): deleted original subsonic.sh file" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi

	if [ -f ${SYNOPKG_PKGDEST}/subsonic_synology.sh ]; then
		mv ${SYNOPKG_PKGDEST}/subsonic_synology.sh ${SYNOPKG_PKGDEST}/subsonic.sh
		echo "$(date +%d.%m.%y_%H:%M:%S): now using edited subsonic.sh file for Synology" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi

	#download and install ffmpeg binarys
	wget ${NATIVE_BINS_URL} --output-document=${SYNOPKG_PKGDEST}/ffmpeg.tgz
	if [ -f ${SYNOPKG_PKGDEST}/ffmpeg.tgz ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): downloaded ffmpeg files from $NATIVE_BINS_URL" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		#Checksum
		if [ `/opt/bin/sha256sum ${SYNOPKG_PKGDEST}/ffmpeg.tgz  | awk '{ print $1 }` = $(eval "echo \$SHA256_$SYNO_CPU_ARCH") ]; then
			echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum OK" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		else
			echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum failed for ffmpeg.tgz" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "SHA256 checksum failed for ffmpeg.tgz. The file was probaply modified or updated" >> $SYNOPKG_TEMP_LOGFILE
			exit 1
		fi
	else
		if [ -d ${PUBLIC_FOLDER} ] && [ -f ${PUBLIC_FOLDER}/ffmpeg.tgz ]; then
			cp ${PUBLIC_FOLDER}/ffmpeg.tgz ${SYNOPKG_PKGDEST}
			echo "$(date +%d.%m.%y_%H:%M:%S): copied ffmpeg files from public folder" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		else
			echo "There was a problem downloading  ffmpeg from the official download link, " >> $SYNOPKG_TEMP_LOGFILE
			echo "which was ${NATIVE_BINS_URL}" >> $SYNOPKG_TEMP_LOGFILE
			echo "Alternatively, you may download this file manually and place it in the 'public' shared folder and neme it ffmpeg.tgz" >> $SYNOPKG_TEMP_LOGFILE
			exit 1
		fi
	fi
	if [ ! -d  ${SYNOPKG_PKGDEST}/transcode ]; then
		mkdir ${SYNOPKG_PKGDEST}/transcode
		echo "$(date +%d.%m.%y_%H:%M:%S): created transcode directory" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi
	if [ ! -d  ${SYNOPKG_PKGDEST}/lib ]; then
		mkdir ${SYNOPKG_PKGDEST}/lib
		echo "$(date +%d.%m.%y_%H:%M:%S): created lib directory" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi

	tar xzvf ${SYNOPKG_PKGDEST}/ffmpeg.tgz -C ${SYNOPKG_PKGDEST}/transcode
	cp -r ${SYNOPKG_PKGDEST}/transcode/lib* ${SYNOPKG_PKGDEST}/lib/
	rm -r ${SYNOPKG_PKGDEST}/transcode/lib*
	rm ${SYNOPKG_PKGDEST}/ffmpeg.tgz
	echo "$(date +%d.%m.%y_%H:%M:%S): copied ffmpeg file and libraries" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

	#########################################
	##start Subsonic
	#fix file permissions
	chmod +x ${SYNOPKG_PKGDEST}/subsonic.sh
	chmod 775 ${SYNOPKG_PKGDEST}/subsonic-booter-jar-with-dependencies.jar
	chmod 775 ${SYNOPKG_PKGDEST}/subsonic.war
	chown -R subsonic:users ${SYNOPKG_PKGDEST}
	echo "$(date +%d.%m.%y_%H:%M:%S): start Subsonic for first initialisation" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

	#set up symlink for the DSM GUI
	ln -s ${SYNOPKG_PKGDEST}/ /usr/syno/synoman/webman/3rdparty/Subsonic

	#create custom temp folder so temp files can be bigger
	if [ ! -d ${SYNOPKG_PKGDEST}/../../@tmp/subsonic ]; then
		mkdir ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
		chown -R subsonic ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
	fi
	#create symlink to the created directory
	if [ ! -L /tmp/subsonic ]; then
		ln -s ${SYNOPKG_PKGDEST}/../../@tmp/subsonic /tmp/
	fi

	#start subsonic as subsonic user
	su - subsonic -s /bin/sh -c /usr/syno/synoman/webman/3rdparty/Subsonic/subsonic.sh

	sleep 5

	subsonic_get_pid
	if [ ! -z $PID ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): started Subsonic successfully. PID is: $PID" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	else
		echo "Error: Can not start Subsonic during install" >> $SYNOPKG_TEMP_LOGFILE
		echo "$(date +%d.%m.%y_%H:%M:%S): Error: Can not start Subsonic during install" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		exit 1
	fi

	#give it some time to start up
	sleep 90

	#stop subsonic

	kill $PID
	sleep 5
	echo "$(date +%d.%m.%y_%H:%M:%S): Stopped Subsonic" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

	####################################
	##download and install additional features
	echo "$(date +%d.%m.%y_%H:%M:%S): Download and install additional Features" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	#Subtunes
	if [ ! -z ${subtunes_install} ]; then
		wget ${DOWNLOAD_URL_SUBTUNES}  --output-document=${SYNOPKG_PKGDEST}/Subtunes.zip
		if [ -f ${SYNOPKG_PKGDEST}/Subtunes.zip ]; then
			echo "$(date +%d.%m.%y_%H:%M:%S): Downloaded Subtunes" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			#Checksum
			if [ `/opt/bin/sha256sum ${SYNOPKG_PKGDEST}/Subtunes.zip  | awk '{ print $1 }` = $SHA256_SUBTUNES ]; then
				echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum OK" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			else
				echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum failed for Subtunes.zip" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
				echo "SHA256 checksum failed for Subtunes.zip. The file was probaply modified or updated" >> $SYNOPKG_TEMP_LOGFILE
				exit 1
			fi
			mkdir ${SYNOPKG_PKGDEST}/Subtunes
			unzip ${SYNOPKG_PKGDEST}/Subtunes.zip -d ${SYNOPKG_PKGDEST}/Subtunes/
			echo "$(date +%d.%m.%y_%H:%M:%S): extracted Subtunes" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		else
			echo "$(date +%d.%m.%y_%H:%M:%S): Error: Subtunes could not be downloaded" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "$(date +%d.%m.%y_%H:%M:%S): Please check the internet connection of your Diskstation" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "Error: Subtunes could not be downloaded" > $SYNOPKG_TEMP_LOGFILE
			echo "Please check the internet connection of your Diskstation" >> $SYNOPKG_TEMP_LOGFILE
			exit 1
		fi

		cp -r ${SYNOPKG_PKGDEST}/Subtunes /usr/syno/synoman/webman/3rdparty/Subsonic/jetty/*/webapp/
		rm -r ${SYNOPKG_PKGDEST}/Subtunes
		rm ${SYNOPKG_PKGDEST}/Subtunes.zip

		echo "$(date +%d.%m.%y_%H:%M:%S): copied Subtunes and deleted downloaded files" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

		#Subtuneslink
		if [ -d ${SYNOPKG_PKGDEST}/Subtuneslink ]; then
			cp ${SYNOPKG_PKGDEST}/Subtuneslink/* /usr/syno/synoman/webman/3rdparty/Subsonic/jetty/*/webapp/Subtunes/
		fi

	fi
	rm -r ${SYNOPKG_PKGDEST}/Subtuneslink

	#MiniSub Update
	if [ ! -z ${minisub_install} ]; then
		wget ${DOWNLOAD_URL_MINISUB} --no-check-certificate --output-document=${SYNOPKG_PKGDEST}/MiniSub.tgz
		if [ -f ${SYNOPKG_PKGDEST}/MiniSub.tgz ]; then
			echo "$(date +%d.%m.%y_%H:%M:%S): Downloaded MiniSub" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
						#Checksum
			#if [ `/opt/bin/sha256sum ${SYNOPKG_PKGDEST}/MiniSub.tgz  | awk '{ print $1 }` = $SHA256_MINISUB ]; then
			#	echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum OK" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			#else
			#	echo "$(date +%d.%m.%y_%H:%M:%S): SHA256 checksum failed for MiniSub.tgz" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			#	echo "SHA256 checksum failed for MiniSub.tgz. The file was probaply modified or updated" >> $SYNOPKG_TEMP_LOGFILE
			#fi
			mkdir ${SYNOPKG_PKGDEST}/MiniSub
			tar xzf ${SYNOPKG_PKGDEST}/MiniSub.tgz -C ${SYNOPKG_PKGDEST}/MiniSub
			echo "$(date +%d.%m.%y_%H:%M:%S): extracted MiniSub" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		else
			echo "$(date +%d.%m.%y_%H:%M:%S): Error: MiniSub could not be downloaded" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "$(date +%d.%m.%y_%H:%M:%S): Please check the internet connection of your Diskstation" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "Error: MiniSub could not be downloaded" > $SYNOPKG_TEMP_LOGFILE
			echo "Please check the internet connection of your Diskstation" >> $SYNOPKG_TEMP_LOGFILE
			exit 1
		fi
		if [ -d /usr/syno/synoman/webman/3rdparty/Subsonic/jetty/*/webapp/mini/ ]; then
			rm -r /usr/syno/synoman/webman/3rdparty/Subsonic/jetty/*/webapp/mini/*
			cp -r ${SYNOPKG_PKGDEST}/MiniSub/*/* /usr/syno/synoman/webman/3rdparty/Subsonic/jetty/*/webapp/mini/
		else
			echo "$(date +%d.%m.%y_%H:%M:%S): Error: Can't find the MiniSub directory -> MiniSub will not be updated " >> ${SYNOPKG_PKGDEST}/subsonic_package.log
			echo "Error: Can't find the MiniSub directory -> MiniSub will not be updated " >> ${SYNOPKG_PKGDEST}/subsonic_package.log >> $SYNOPKG_TEMP_LOGFILE
			exit 1
		fi
		rm -r ${SYNOPKG_PKGDEST}/MiniSub
		rm ${SYNOPKG_PKGDEST}/MiniSub.tgz
		echo "$(date +%d.%m.%y_%H:%M:%S): copied MiniSub and deleted downloaded files" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	fi

	#MiniSub Link
	echo "$(date +%d.%m.%y_%H:%M:%S): create MiniSub DSM link" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	if [ -d ${SYNOPKG_PKGDEST}/MiniSublink/ ]; then
		cp ${SYNOPKG_PKGDEST}/MiniSublink/* /usr/syno/synoman/webman/3rdparty/Subsonic/jetty/*/webapp/mini/
	fi
	rm -r ${SYNOPKG_PKGDEST}/MiniSublink
	####################################

	#delete symlink
	rm /usr/syno/synoman/webman/3rdparty/Subsonic
	#delete temp files
	if [ -d ${SYNOPKG_PKGDEST}/../../@tmp/subsonic ]; then
		rm -r ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
	fi

	#check Podcast folder for right permissions
	if [ -d /volume1/music/Podcast ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): reset permissions of Podcast folder (subsonic user has new uid)" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		chown -R admin:users /volume1/music/Podcast
		chmod -R 775 /volume1/music/Podcast
	fi

	#########################################
	#install user backup from public folder

	if [ ! -z ${install_restore} ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): restore previously made backup fron public folder" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		#copy files
		cp -r ${PUBLIC_FOLDER}/Subsonic/* ${SYNOPKG_PKGDEST}/

		#new files might not be owned by subsonic user
		chown -R subsonic ${SYNOPKG_PKGDEST}/

		#make the Subsonic start script executable
		chmod +x ${SYNOPKG_PKGDEST}/subsonic.sh
	fi
	echo "$(date +%d.%m.%y_%H:%M:%S): ----installation complete----" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	exit 0
}

preuninst ()
{
	##############################################
	stop Subsonic if it is running

	subsonic_get_pid
	if [ -z $PID ]; then
		sleep 1
	else
		echo "$(date +%d.%m.%y_%H:%M:%S): stopping Subsonic" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		kill $PID
		sleep 5
		if [ -L /usr/syno/synoman/webman/3rdparty/Subsonic ]; then
			rm /usr/syno/synoman/webman/3rdparty/Subsonic
		fi

		if [ -d ${SYNOPKG_PKGDEST}/../../@tmp/subsonic ]; then
			rm -r ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
		fi
	fi

	##############################################
	# create a backup in public folder in public folder
	if [ ! -z ${uninstall_backup} ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): Create a backup of Subsonic in public folder" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

		if [ ! -d ${PUBLIC_FOLDER}/Subsonic ]; then
			mkdir ${PUBLIC_FOLDER}/Subsonic
		fi

		cp ${SYNOPKG_PKGDEST}/subsonic.properties *.index ${PUBLIC_FOLDER}/Subsonic
		cp -r ${SYNOPKG_PKGDEST}/db ${PUBLIC_FOLDER}/Subsonic
		cp -r ${SYNOPKG_PKGDEST}/lucene ${PUBLIC_FOLDER}/Subsonic
		cp -r ${SYNOPKG_PKGDEST}/thumbs ${PUBLIC_FOLDER}/Subsonic
	fi

	exit 0
}

postuninst ()
{
	synouser --del subsonic

	#remove DSM icon symlink
	if [ -L /usr/syno/synoman/webman/3rdparty/Subsonic ]; then
		rm /usr/syno/synoman/webman/3rdparty/Subsonic
	fi

	#remove temp symlink
	rm /tmp/subsonic

	exit 0
}

preupgrade ()
{
	###########################
	#stop Subsonic if it is runing

	subsonic_get_pid
	if [ ! -z $PID ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): stopping subsonic" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		kill $PID
		sleep 5
	fi

	if [ -d ${SYNOPKG_PKGDEST}/../../@tmp/subsonic ]; then
		rm -r ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
	fi

	###########################
	#backup subsonic.properties and db Folder

	if [ -z ${install_restore} ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): create backup of Subsonic db in temporary backup dir" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		if [ ! -d ${SYNOPKG_PKGDEST}/../subsonic_update_backup ]; then
			mkdir ${SYNOPKG_PKGDEST}/../subsonic_update_backup
			cp ${SYNOPKG_PKGDEST}/subsonic.properties ${SYNOPKG_PKGDEST}*.index ${SYNOPKG_PKGDEST}/../subsonic_update_backup/
			cp -r ${SYNOPKG_PKGDEST}/db ${SYNOPKG_PKGDEST}/../subsonic_update_backup
			cp -r ${SYNOPKG_PKGDEST}/lucene ${SYNOPKG_PKGDEST}/../subsonic_update_backup
			cp -r ${SYNOPKG_PKGDEST}/thumbs ${SYNOPKG_PKGDEST}/../subsonic_update_backup
		fi
	fi

	exit 0
}

postupgrade ()
{

	###############################
	#restore subsonic db index and settings
	if [ ! -z ${install_update} ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): restore from temporary backup dir" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		cp -r ${SYNOPKG_PKGDEST}/../subsonic_update_backup/* ${SYNOPKG_PKGDEST}/
	fi

	#remove backup folder
	#remove the next lines to keep a backup in the @appstore folder
	if [ -d ${SYNOPKG_PKGDEST}/../subsonic_update_backup ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): remove temporary backup dir" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		rm -r ${SYNOPKG_PKGDEST}/../subsonic_update_backup
	fi

	#subsonic may not own all new files
	chown -R subsonic ${SYNOPKG_PKGDEST}/

	#make the Subsonic start script executable
	chmod +x ${SYNOPKG_PKGDEST}/subsonic.sh

	echo "$(date +%d.%m.%y_%H:%M:%S): ----update complete----" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

	exit 0
}

start-stop-status

#!/bin/sh

#--------Subsonic start-stop-status script
#--------package maintained at eg-blog.de

##############################################
#function to get the process id of Subsonic
PID=""
subsonic_get_pid ()
{
	PID=`ps | grep java | grep subsonic | awk '{print $1}'`
	#echo "$(date +%d.%m.%y_%H:%M:%S): looking for PID" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
}
get_time()
{
	TIME=$(date +%d.%m.%y_%H:%M:%S)
}

case "$1" in
   start)
	  ###---copied from patters start-stop-status.sh of his crashplan proe package---
	  DAEMON_ID="${SYNOPKG_PKGNAME} daemon user"
	  DAEMON_HOME="`cat /etc/passwd | grep "${DAEMON_ID}" | cut -f6 -d':'`"

	  #set the current timezone for Java so that log timestamps are accurate
	  #we need to use the modern timezone names so that Java can figure out DST
	  SYNO_TZ=`cat /etc/synoinfo.conf | grep timezone | cut -f2 -d'"'`
	  SYNO_TZ=`grep "^${SYNO_TZ}" /usr/share/zoneinfo/Timezone/tzname | sed -e "s/^.*= //"`
	  grep "^export TZ" ${DAEMON_HOME}/.profile > /dev/null \
	  && sed -i "s%^export TZ=.*$%export TZ='${SYNO_TZ}'%" ${DAEMON_HOME}/.profile \
	  ###---end of copy---------------------------------------------------------------

	  #set up symlinks for the DSM GUI icon
	  #Subsonic main
	  if [ -d /usr/syno/synoman/webman/3rdparty ]; then
		ln -s ${SYNOPKG_PKGDEST}/ /usr/syno/synoman/webman/3rdparty/Subsonic
		echo "$(date +%d.%m.%y_%H:%M:%S): Subsonic DSM link created" >> ${SYNOPKG_PKGDEST}/subsonic_package.log

		#MiniSub
		if [ -d ${SYNOPKG_PKGDEST}/jetty/*/webapp/mini ]; then
			ln -s ${SYNOPKG_PKGDEST}/jetty/*/webapp/mini /usr/syno/synoman/webman/3rdparty/Subsonic_MiniSub
			echo "$(date +%d.%m.%y_%H:%M:%S): MiniSub DSM link created" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		fi
		#Subtunes
		if [ -d ${SYNOPKG_PKGDEST}/jetty/*/webapp/Subtunes ]; then
			ln -s ${SYNOPKG_PKGDEST}/jetty/*/webapp/Subtunes /usr/syno/synoman/webman/3rdparty/Subsonic_Subtunes
			echo "$(date +%d.%m.%y_%H:%M:%S): Subtunes DSM link created" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		fi
	  else
		echo "$(date +%d.%m.%y_%H:%M:%S) : Error: Directory for Subsonic DSM link was not found" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
      #create custom temp folder so temp files can be bigger
	  if [ ! -d ${SYNOPKG_PKGDEST}/../../@tmp/subsonic ]; then
		mkdir ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
		chown -R subsonic ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
		echo "$(date +%d.%m.%y_%H:%M:%S): Temp directory created" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  #create symlink to the created directory
	  if [ ! -L /tmp/subsonic ]; then
		ln -s ${SYNOPKG_PKGDEST}/../../@tmp/subsonic /tmp/
		echo "$(date +%d.%m.%y_%H:%M:%S): Temp directory link created" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  # starting subsonic as subsonic daemon user
	  echo "$(date +%d.%m.%y_%H:%M:%S): starting Subsonic as subsonic daemon user" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
      su - subsonic -s /bin/sh -c /usr/syno/synoman/webman/3rdparty/Subsonic/subsonic.sh
      sleep 10
	  echo "$(date +%d.%m.%y_%H:%M:%S): started Subsonic as subsonic daemon user" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  subsonic_get_pid
	  if [ ! -z $PID ]; then
		echo "$(date +%d.%m.%y_%H:%M:%S): started Subsonic successfully. PID is: $PID" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		echo "$(date +%d.%m.%y_%H:%M:%S): ----subsonic is running----" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  else
		echo "$(date +%d.%m.%y_%H:%M:%S): Error: Can not start Subsonic" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
		exit 1
	  fi

	  exit 0
   ;;
   stop)
      #stop subsonic
	  subsonic_get_pid
      kill $PID
	  echo "$(date +%d.%m.%y_%H:%M:%S) : killed Subsonic PID: $PID" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
      sleep 2
	  #delete Symlinks and DSM icon
	  if [ -L /usr/syno/synoman/webman/3rdparty/Subsonic ]; then
		rm /usr/syno/synoman/webman/3rdparty/Subsonic
		echo "$(date +%d.%m.%y_%H:%M:%S): Subsonic DSM link deleted" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  if [ -L /usr/syno/synoman/webman/3rdparty/Subsonic_MiniSub ]; then
		rm /usr/syno/synoman/webman/3rdparty/Subsonic_MiniSub
		echo "$(date +%d.%m.%y_%H:%M:%S): MiniSub DSM link deleted" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  if [ -L /usr/syno/synoman/webman/3rdparty/Subsonic_Subtunes ]; then
		rm /usr/syno/synoman/webman/3rdparty/Subsonic_Subtunes
		echo "$(date +%d.%m.%y_%H:%M:%S): Subtunes DSM link deleted" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  if [ -d ${SYNOPKG_PKGDEST}/../../@tmp/subsonic ]; then
		rm -r ${SYNOPKG_PKGDEST}/../../@tmp/subsonic
		echo "$(date +%d.%m.%y_%H:%M:%S): Temp files deleted" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  if [ -L /tmp/subsonic ]; then
		rm /tmp/subsonic
		echo "$(date +%d.%m.%y_%H:%M:%S): Temp link deleted" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  fi
	  echo "$(date +%d.%m.%y_%H:%M:%S): ----subsonic is stopped----" >> ${SYNOPKG_PKGDEST}/subsonic_package.log
	  exit 0
   ;;
   status)
      subsonic_get_pid
      if [ -z  $PID ]; then
	  #Subsonic is not running
		exit 1
	  else
	  #subsonic is running
		exit 0
      fi
   ;;
   log)
	  echo "${SYNOPKG_PKGDEST}/subsonic_package.log"
	  exit 0
   ;;
esac